|
PRO7000FX - Professional Digital RF Detector
|
|
PRO7000FX - Professional Digital RF Detector
The PRO7000FX is the ultimate Professional handheld Bug Detector which packs all the necessary features of a professional RF (Radio Frequency) Detector
Once a suspect signal is detected its signal strength will be displayed with optional audio beep tone to help you pin point the signal source.
The PRO7000FX can also be set to silent vibrate mode for ultra discreet or concealed use, in a jacket pocket for example.
With the supplied earphones connected the signal can then be demodulated and heard to confirm the presence of hidden microphones.
It also features a frequency counter that can display the frequency of a detected signal (0-2560 MHz) to quickly and reliably establish what kind of signal is present whilst performing a counter-measures sweep.
Once a signal is located it is then processed by the intelligent software algorithms of the PRO7000FX to determine whether a signal is Analogue or Digital.
These features allow fast elimination of innocent signals from a sweep. All this information is displayed on the customised back-lit LCD display which can be clearly viewed in all lighting conditions.
The ‘Burst Detect’ feature helps to locate the latest digital devices that only transmit momentarily and can therefore be easily missed using conventional bug detectors.
Such devices include GPS Trackers and GSM (Mobile phone) based devices where a ‘Burst’ signal or SMS (Text Messages) are sent momentarily.
The PRO7000FX will alert you if a device has transmitted within the vicinity even for just a fraction of a second.
The PRO7000FX has an internal Lithium-Ion battery pack and uses an intelligent charger system to ensure the battery remains in top condition for the most demanding situations.
The whole unit is contained within a machined aircraft-grade aluminium enclosure for ultimate performance and durability and supplied in a portable carry case for further protection and portability.
-
Detects both Digital & Analogue Signals
-
Ultra Wide Frequency response 7200MHz (7.2GHz)
-
Built in Frequency Counter (0 to 2560 MHz)
-
Intelligent ‘Digital’ or ‘Analogue’ Indicator to determine signal type
-
Digital ‘Burst’ Signal Detect for Burst/GSM/3G/GPS Devices
-
10 Segment Signal Strength Meter
-
Ultra High Sensitivity to locate even the weakest signals
-
Backlit LCD Display for use in all conditions
-
Audio Demodulation
-
Silent Vibrate & Beep Modes for Signal Strength
-
Internal Li-Ion Battery Pack and Mains Charger
|
Model
|
PRO-7000FX
|
| ANTENNA INPUT
|
|
| Connector
|
MCX Socket - 50 Ohm
|
| Input Frequency Range
|
1MHz – 7200MHz (7.2GHz)
|
| Sensitivity 100MHz
|
-47dBm
|
| 200MHz
|
-47dBm
|
| 500MHz
|
-46dBm
|
| 1GHz
|
-41dBm
|
| 2GHz
|
-29dBm
|
| 5GHz
|
-8dBm
|
| 7.2GHz
|
-3dBm
|
| Demodulation Sensitivity for 50mW Audio
|
-30dBm (measured at 500MHz 50% AM 1kHz)
|
| Frequency Response
|
400Hz – 5kHz +/-2dB
|
| INSTRUMENT DISPLAY
|
|
| Type
|
LCD STN Backlit
|
| RF Signal Strength
|
10 element bargraph
|
| RF Carrier Frequency
|
2560.0MHz (2.56GHz) maximum
|
| INTERNAL AUDIO AMPLIFIER
|
|
| Output Power
|
0.25W
|
| Frequency Response
|
300Hz – 15kHz +/-1dB
|
| Headphone Connector
|
3.5mm Jack
|
| MISCELLANEOUS
|
|
| Internal Battery
|
7.2V 650 mAH Li-Ion rechargeable
|
| Operating Duration
|
8 hours
|
| Fully charged battery
|
|
| Charge Time – using supplied charger
|
3 hours maximum
|
| Operating Temperature Range
|
-10 – +50 degrees C
|
| Relative Humidity
|
< 90%
|
| Dimensions
|
114mm x 69mm x 25mm
|
| Weight
|
245 g
|
| Signal Processing and Control
|
RISC Based Microcontroller
|
-
PRO-7000FX Main Unit
-
Semi-Rigid Wideband Whip Antenna
-
Flexible Wideband Whip Antenna
-
Earphones
-
9V DC Charger - 110V to 240V AC input (Auto Switching) with International Adaptors
-
Protective Carry Case
|
Product Reviews
|
|
|